Best eDPI for CS2 and CS:GO: What Pros Use and How to Pick Yours

You copy a pro's sensitivity, and your crosshair sails past every head. That miss feels awful, yet the cause is simple. DPI and in-game sensitivity only work as a pair, so single numbers mislead. The best eDPI for CS2 sits between 700 and 1,000, and 800 is the safest place to start.

Quick answer: The best eDPI for CS2 starts at 800, which equals about 52 cm per 360 turn. Pro medians sit between 800 and 830 across two large databases. Move in 10% steps only after a full week of play.

What Is the Best eDPI for CS2?

Pros do not agree on one number, yet the spread is narrow. CSDB.gg tracks 1,007 professional players, and their median eDPI is 800 with a mean of 849. ProSettings.net reports a median of 830 across 920 pros as of May 2026. So the best eDPI for CS2 starts near 800 and rarely strays far from it.

Team averages tell the same story. Most squads in the CSDB.gg database average between roughly 700 and 960 eDPI. Only a few teams sit far below or above that band. Treat 700 to 1,000 as your safe zone, then fine-tune by feel.

How to Calculate eDPI in CS2

The formula behind the best eDPI for CS2 takes about ten seconds to learn. Multiply your mouse DPI by your in-game sensitivity, and you have your effective DPI. For example, 400 DPI at 2.0 sensitivity gives 800 eDPI, and 800 DPI at 1.0 gives the same 800. Both setups turn your crosshair at an identical speed.

Hardware matters here too, because your DPI figure must be accurate. A mouse can report a DPI that differs from its real output, so run it through the DPI analyzer first. Then drop your numbers into the eDPI calculator and compare them with the safe zone above.

How Many cm for a 360 in CS2?

Distance per turn shows how the best eDPI for CS2 actually feels. Divide 41,564 by your eDPI to get cm/360, because CS2 uses a yaw value of 0.022. At 600 eDPI that equals 69 cm, at 800 it equals 52 cm, and at 1,000 it equals 42 cm. ProSettings.net puts the average pro turn at about 47 cm.

What Sensitivity Do CS2 Pros Use?

Setups look different on paper, yet they land close together in practice. The table below lists five players from the CSDB.gg database, checked in October 2026. Notice how different DPI and sensitivity pairs produce similar eDPI and turn distances.

All five land between 720 and 1,000 eDPI, which matches the best eDPI for CS2 range above. Their turn distances run from 42 to 58 cm. Copying one player blindly still carries risk, because each built muscle memory at that exact setting.

Do AWPers Really Use Lower Sensitivity?

Many players assume the best eDPI for CS2 drops for AWPers, but the data disagrees. CSDB.gg lists a mean of 921 eDPI for AWPers against 834 for riflers. The median gap is smaller, at 840 versus 800. Flick shots reward a little extra speed, which may explain the gap.

What Is the Best CS2 Sensitivity for Beginners?

New players should start at 800 eDPI and skip the fancy tweaks. That number matches the pro median and equals about 52 cm per turn. The best eDPI for CS2 beginners is the one you can repeat without thinking.

Higher sensitivity feels exciting during warm-ups, yet it usually hurts spray control and counter-strafing in real rounds. Tiny micro-adjustments need a hand that travels a little further. Slow and steady wins more duels than flashy flicks. Staying near the best eDPI for CS2 range keeps those skills sharp.

Best eDPI for CS2 With 800 DPI and 400 DPI

At 800 DPI, an in-game sensitivity of 1.0 gives 800 eDPI. At 400 DPI, the same result needs a sensitivity of 2.0. Pick whichever DPI your mouse tracks cleanly, because the feel stays identical. Pros use both, as the table above shows.

How to Find Your Best CS2 Sensitivity in 5 Steps

Clear steps beat random guessing when you pick the best eDPI for CS2. Run these five steps once, then commit to the result.

1. Set your mouse to 400 or 800 DPI and aim for 800 eDPI.
2. Mark your mousepad and measure how far you travel for a full 360 turn.
3. Load a practice map and shoot bots at varied distances.
4. Adjust eDPI by 10% at most, and only if flicks or fine control feel wrong.
5. Lock the number in and leave it alone for one to two weeks.

Consistency matters more than chasing a perfect number. Muscle memory builds only when the setting stays still, so resist tweaking after a bad match. Bad rounds often come from positioning and decisions rather than your mouse.

How Long Should You Practice With One Sensitivity?

Even the best eDPI for CS2 needs a full week of play before you judge it, and two is better. Your hand needs repeated flicks, spray pulls and crosshair placement reps to adapt. Switching earlier resets the clock and teaches you nothing.

How to Convert CS:GO Sensitivity to CS2

Veterans get good news, because CS2 keeps the 0.022 yaw value from CS:GO. Your old DPI and in-game sensitivity carry over without any conversion. So the best eDPI for CS2 matches whatever worked for you in CS:GO.

Keep your old eDPI and expect the same crosshair speed. A player at 800 eDPI in CS:GO stays at 800 eDPI in CS2. That is why the best eDPI for CS:GO and CS2 forms one shared range.

How to Convert Valorant Sensitivity to CS2

Valorant uses a yaw of 0.07, so multiply your Valorant sensitivity by 3.18 at the same DPI. For example, 0.3 at 800 DPI becomes about 0.95 in CS2, or roughly 764 eDPI. Check that result against the best eDPI for CS2 range, then fine-tune using the five steps above. The best eDPI for Valorant guide covers the reverse trip.

CS2 Mouse Settings That Protect Your Sensitivity

Perfect eDPI means little if the rest of your input chain leaks. CS2 handles raw input on its own, so Windows pointer acceleration cannot alter your in-game aim. Still, keep Windows sensitivity at 6 out of 11, as donk and m0NESY both do. That default setting applies a clean 1:1 multiplier.

Next, check your polling rate, because a stable signal keeps flicks accurate. A 1,000 Hz mouse is a safe baseline, since CSDB.gg lists donk at 1,000 Hz and m0NESY at 2,000 Hz. Run the polling rate test to confirm your mouse reports what the box promises. The Mouse Test then reveals skipping or jitter that could ruin your setup.

Common CS2 Sensitivity Mistakes

Several habits quietly sabotage the best eDPI for CS2 you already chose. The biggest is chasing a new number after every lost match. Another is copying a pro's in-game sensitivity without matching their DPI, which produces a different eDPI.

• Practicing aim drills at a different sensitivity than you play at.
• Judging feel by the raw sensitivity value instead of cm/360.
• Jumping far above the best eDPI for CS2 range just to chase faster flicks.

Snapshots age quickly, so check dates before copying anyone. CSDB.gg lists m0NESY at 920 eDPI, yet a 2026 stream report from Escore News showed 800. Treat every pro table as a starting point, not a rulebook.

FAQs

Is 800 eDPI Good for CS2?

Yes, 800 eDPI is a strong choice for most players. It matches the CSDB.gg median and sits just under the ProSettings.net median of 830.

Is 400 or 800 DPI Better for CS2?

Neither wins, because eDPI decides the feel, and the best eDPI for CS2 depends on both numbers. Pick the DPI your mouse tracks cleanly, then set sensitivity to reach your target.

Should I Use Low or High Sensitivity in CS2?

Lean low to medium, since the best eDPI for CS2 sits near 700 to 1,000. That zone rewards steady spray control while still allowing quick turns.

Can a Small Mousepad Limit My eDPI?

It can, because 800 eDPI needs about 52 cm of travel for a full turn. Lift and reset the mouse mid-turn, or raise eDPI slightly while staying near 1,000.

Should I Change eDPI When I Buy a New Mouse?

No, keep the same eDPI and verify the new mouse's real DPI with the DPI analyzer. Shape and weight may feel different, but the math stays identical.

Lock In Your Number and Start Playing

Repeatability defines the best eDPI for CS2, far more than any single pro's number. Pro data from CSDB.gg and ProSettings.net points to a median between 800 and 830. A safe zone runs from 700 to 1,000, which equals about 42 to 59 cm per turn.

Start at 800 eDPI, measure your cm/360 and test it for one to two weeks. Then adjust by 10% at most if something feels wrong. Clean mouse settings, an accurate DPI and a steady routine protect the best eDPI for CS2 you picked.

Open the eDPI calculator and compare your setup with the best eDPI for CS2 range. Then load a practice map and put in the reps. The number is only a tool, and repetition builds the aim.